Edson International, Marine Division
146 Duchaine Blvd., New Bedford, MA 02745
Tel: 508 995 9711 Fax: 508 995 5021 Email:
info@edsonintl.comStern Rack for Inflatables Stow it Don't tow it! Edson's durable glossy white powder-coated aluminum brackets hold your dinghy securely against the transom of your powerboat. Designed to bolt directly to your stern rail and will carry the standard inflatable approximately even with the top of your stern railing. Designed to fit inflatables with 12"/30.5 cm to 16"/40.6 cm diameter air chambers, they can also carry bicycles and you can stow your inflatable when the boat is at your marina. Fits 1"/25.4 mm railing. Wt. 6 lb (2.7 kg) per pair. Stern Rack for Inflatables (Pair) Order #511-151 Inflatable Holders Edson's Flip-Out Inflatable Holder allows you to conveniently stow your inflatable on the swim platform. Just flip out the arms; place the inflatable between the transom and the holders; pull up on lines attached to arms, bringing the inflatable against the transom; and cleat in place. The holder closes to less than two inches in height and is always ready. Wt. 2 lbs/.9 kg each, two required. Flip Out Inflatable Holder Order #516-14 Chocks for Inflatables Edson's Inflatable Chocks are made of strong, lightweight 356-T6 aluminum with a glossy white baked-on urethane powder coating. They have built-in cleats, well-rounded corners and an opening to stow your boat hook. The chocks fit inflatables with fifteen to seventeen inch diameter tubes and can be mounted forward or aft. 3" Chock Order #515-16-3 Wt. 3.7 lbs/1.6 kg each, four are required. 6" Chock Order #515-16-6 Wt. 4.5 lbs/2 kg each, four are required. Part No. 515-16-3 Part No. 515-16-6
